- “LC to LC UPC 2M SM Simplex” already exists in your wishlist
-
1M Fiber Patchcord SC/UPC-SC/UPC
SC to SC UPC Fiber Optic Patch Cord, Single-Mode simplex
KSh150.00Inquire1M Fiber Patchcord SC/UPC-SC/UPC
KSh150.00 -
SC/UPC 2M SM Simplex
Technical Specifications
Feature Specification Connector Type SC to SC (Simplex) Polish Type UPC (Ultra Physical Contact) Fiber Mode OS2 Single Mode (9/125µm) Length 2.0 Meter (6.3 feet) Insertion Loss ≤0.3 dB (Typical 0.2 dB) Return Loss ≥50 dB Wavelengths 1310nm / 1490nm / 1550nm Jacket Material LSZH (Low Smoke Zero Halogen) Operating Temp -40°C to +75°C KSh170.00InquireSC/UPC 2M SM Simplex
KSh170.00 -
SC to LC UPC 2M SM Simplex
Technical Specifications
Feature Specification Connector Type SC to LC (Simplex) Polish Type UPC (Ultra Physical Contact) Fiber Mode OS2 Single Mode (9/125µm) Length 2.0 Meter (6.6 feet) Insertion Loss ≤0.3 dB (Typical 0.2 dB) Return Loss ≥50 dB Fiber Standard G.652.D / OS2 Jacket Material LSZH (Low Smoke Zero Halogen) Operating Temp -20°C to +70°C KSh170.00InquireSC to LC UPC 2M SM Simplex
KSh170.00 -
LC to LC UPC 2M SM Simplex
Technical Specifications
Feature Specification Connector Type LC to LC (Simplex) Polish Type UPC (Ultra Physical Contact) Fiber Mode OS2 Single Mode (9/125µm) Length 2.0 Meter (3.3 feet) Insertion Loss ≤0.3 dB (Typical 0.2 dB) Return Loss ≥50 dB Fiber Standard G.652.D / OS2 Jacket Material LSZH (Low Smoke Zero Halogen) Operating Temp -40°C to +75°C KSh170.00InquireLC to LC UPC 2M SM Simplex
KSh170.00 -
Splitter 1×2 Tube Splitter Without Connector
Technical Specifications
Feature Specification Split Configuration 1×2 (One Input, Two Outputs) Technology PLC (Planar Lightwave Circuit) Fiber Type G.657.A1 (Bend Insensitive) Fiber Diameter 250µm Bare Fiber Insertion Loss ≤3.8 dB (Max) Uniformity ≤0.4 dB PDL (Polarization Loss) ≤0.2 dB Wavelength Range 1260nm – 1650nm Housing Material Stainless Steel (Mini Tube) Operating Temp -40°C to +85°C KSh200.00Inquire -
Universal Pole Bracket (UPB)
Specification Details Product Type Universal Pole Mounting Bracket Material Stainless steel / galvanized steel Mounting Type Pole-mounted (aerial installation) Compatibility Fiber closures, ODFs, FAT boxes Pole Diameter Range Adjustable (varies by strap length) Corrosion Resistance Yes (outdoor-rated coating) Installation Method Steel straps / band clamps Load Capacity Depends on model (typically high strength) Environment Indoor / Outdoor (primarily outdoor) Accessories Included Mounting straps, bolts, clamps Application Telecom, FTTH, fiber network setups KSh249.00InquireUniversal Pole Bracket (UPB)
KSh249.00 -
Splitter 1×4 Tube Splitter Without Connector
Technical Specifications
Feature Specification Split Configuration 1×4 (One Input, four Outputs) Technology PLC (Planar Lightwave Circuit) Fiber Type G.657.A1 (Bend Insensitive) Fiber Diameter 250µm Bare Fiber Insertion Loss ≤3.8 dB (Max) Uniformity ≤0.4 dB PDL (Polarization Loss) ≤0.2 dB Wavelength Range 1260nm – 1650nm Housing Material Stainless Steel (Mini Tube) Operating Temp -40°C to +85°C KSh250.00Inquire -
Universal Pole Bracket
Technical Specifications
Feature Specification Material High-Strength Aluminum Alloy Breaking Load 1500daN (15kN) Mounting Points 5 High-Tensile Eyes Fastening Type 20mm Steel Banding or M14/M16 Bolts Corrosion Resistance Salt Spray Tested (1000+ Hours) Pole Compatibility Wood, Concrete, Steel (Round/Square) Weight ~0.5kg – 0.8kg Compliance Meets NFC 33-041 & 33-042 Standards KSh250.00InquireUniversal Pole Bracket
KSh250.00 -
Anti-cutting Anti-oil Stain Waterproof Protective Work Gloves Lightweight Breathable Gloves
Anti-cutting Anti-oil Stain Waterproof Protective Work Gloves Lightweight Breathable Gloves
Anti-Cutting Protection: Excellent durability against sharp objects, safeguarding hands during work. Anti cutAnti-Oil Stain Resistant: Keeps gloves clean and functional even after exposure to oil-based substances.
Waterproof Design: Ensures prolonged use without water seeping through, keeping hands dry.
Lightweight and Breathable: Comfortable wear throughout the day, reducing fatigue.
High-Quality Material: Made from durable fabrics, ensuring long-lasting performance.
KSh300.00InquireAnti-cutting Anti-oil Stain Waterproof Protective Work Gloves Lightweight Breathable Gloves
KSh300.00 -
ADSS Tension clamp PA 1500
- Simple and fast installation requiring no tools.
- Suits to all field configurations.
- Possible to mount on pole line hardware with open or closed eye.
- Mechanical traction resistant.
KSh349.00InquireADSS Tension clamp PA 1500
KSh349.00 -
Splitter 1×8 Tube Splitter Without Connector
Technical Specifications
Feature Specification Split Configuration 1×8 (One Input, Eight Outputs) Technology PLC (Planar Lightwave Circuit) Fiber Type G.657.A1 (Bend Insensitive) Fiber Diameter 250µm Bare Fiber Insertion Loss ≤3.8 dB (Max) Uniformity ≤0.4 dB PDL (Polarization Loss) ≤0.2 dB Wavelength Range 1260nm – 1650nm Housing Material Stainless Steel (Mini Tube) Operating Temp -40°C to +85°C KSh350.00Inquire -
PA 1500 Tension Clamp
Technical Specifications
Feature Specification Model PA 1500 (Anchor/Tension Type) Breaking Load 1500daN (15kN) Cable Compatibility 8mm – 14mm Diameter Body Material High-Strength Aluminum Alloy Wedge Material UV-Stabilized Engineering Plastic Bail/Link Material Stainless Steel (Flexible Wire or Rigid) Installation Temp -20°C to +60°C Operating Temp -40°C to +80°C KSh350.00InquirePA 1500 Tension Clamp
KSh350.00 -
J-hook suspension clamp cable diameter 10- 15mm
- Cable span: span up to 100meters
- Breaking Load (KN): 12Kn
- Suitable for cable:10~15mm ADSS cable
- material: Aluminum +Plastic
- insert: Protected Neoprene
- Screw : protected steel
- Processing Technology: Forming
KSh399.00Inquire -
J-Hook Suspension Clamp (12–15mm)
Technical Specifications
Feature Specification Model J-Hook Suspension Clamp (JSC) Cable Capacity 12mm – 15mm (Outer Diameter) Max Vertical Load 500daN (5kN) Max Line Angle Up to 25° Frame Material Hot-Dip Galvanized Steel Insert Material UV-Stabilized Thermoplastic / Neoprene Mounting Hole 14mm – 16mm (Universal Bolt Fit) Service Life 20+ Years Compliance Meets International Aerial Utility Standards KSh399.00InquireJ-Hook Suspension Clamp (12–15mm)
KSh399.00 -
ADSS Tension clamp PA 2000
- Simple and fast installation requiring no tools.
- Suits to all field configurations.
- Possible to mount on pole line hardware with open or closed eye.
- Mechanical traction resistant.
KSh400.00InquireADSS Tension clamp PA 2000
KSh400.00 -
PA 2000 Tension Clamp
Technical Specifications
Feature Specification Model PA 2000 (Anchor/Tension Type) Breaking Load 2000daN Cable Compatibility 8mm – 14mm Diameter Body Material High-Strength Aluminum Alloy Wedge Material UV-Stabilized Engineering Plastic Bail/Link Material Stainless Steel (Flexible Wire or Rigid) Installation Temp -20°C to +60°C Operating Temp -40°C to +80°C KSh400.00InquirePA 2000 Tension Clamp
KSh400.00 -
Preformed Dead End Clamp Guy Grips For OPGW ADSS Cable
Suitable cable diameter 10-15mmSpan 100m,200m,300m,400m,500m,etcKSh450.00Inquire -
Preformed Twisted Wire Guy Grip Deadend Tension Clamp
Aluminum Clad Preformed Twisted Wire Guy Grip Deadend Tension Clamp
Preformed Tension Clamp For ADSS Cable:
Tension Clamps are designed to connect ADSS cables and poles/towers . Armor rods can provide protection and cushioning to the ADSS cables. The special design of Preformed rods makes ensure that Tension Clamps can’t cause undue stress to the ADSS cables, so as to ensure the normal lifetime of cables system.Structure and Raw Material:
Shackle–Hot dip galvanized steel. Shackle is connected with Reinforcing Pole units.
Twisted Chain Link–Hot dip galvanized steel. Twisted Chain Link is intended for connecting U- Shackle and Clevis Thimble.
Thimble—Hot dip galvanized cast steel. Thimble is plugged in shackle of Tension Clamp for protection and connection.
Armor Rods-—- Aluminum clad steel wire. Armor Rods increase friction with a layer of particle emery inside to cables. Rods are assembled into four subsets in workshop which reduce misalignment errors and speeds installation. The ends are bent outward to provide stress relief at the critical cable departure areas.
Preformed Dead End — Preformed Dead End are made of hot dip galvanized steel wire or aluminum clad steel wire, it is assembled into one subset with a layer of firm emery inside in workshop, in order to increase gripping strength of Tension Clamps while decreasing side pressure.KSh450.00Inquire -
Anti Cut Gloves Cut Resistant Gloves
13 Gauge seamless knitted with cut fiber HPPE, Glass fiber, Spandex and Nylon
* Cut resistance, abrasion resistance, tear resistance, puncture resistance
* PU coating on palm and around fingers for extra Cut and abrasion resistance
* Protect your hands from the harm of cuts, scratches, sharp and broken objects.
* Durable yarn for strength and comfortable fit, cut resistant
* Reversible for right or left hand use
* Provides excellent grip in wet or dry conditions
* UV protected, Machine washable
* OEM is acceptable, customer’s subjects and own design is acceptableKSh499.00InquireAnti Cut Gloves Cut Resistant Gloves
KSh499.00 -
Tangent Suspension Clamp
- Non-damaging grip: Designed to hold cables without crushing or deforming them
- Flexible suspension: Lets the cable move slightly instead of being rigidly fixed
- Durable materials: Usually made from aluminum alloy, galvanized steel, or UV-resistant polymer
- Easy installation: Often installed using hooks or brackets on poles
KSh600.00InquireTangent Suspension Clamp
KSh600.00
